Rules for cleaning the TV remote

Any technique requires constant care, and the TV remote control is no exception. After all, he is most in contact with the person. Every day he is taken into the hands of all members of the family, even pets often touch him. Therefore, not only dust and dirt, but also various microbes and bacteria get on the surface of the console as well as inside. However, some contamination can lead to oxidation of the contacts, which in turn will cause damage to the device. And, accordingly, you will need to remember the past, when even to increase or decrease the volume it was necessary to rise and approach the TV. Therefore, to know how to clean the TV remote, everyone needs.

Deep and thorough cleaning of the device

The procedure is quite time-consuming and requires care, because Remote control will have to disassemble. If there is a certain fear and self-doubt, then you can do a simple clean the remote from the outside.

Disassembly console

Of course, there is always an interest to know how any device works. But it is very important to be careful and be careful, because it will need to be collected again. Initially, it is worth opening a compartment with power and take out the batteries. Then you will need the help of a screwdriver, as you should unscrew all the screws that are used to connect the two halves of the remote control case. Now the remote will be very easy to understand.

If the body is not divided, and the screws are unscrewed, then you can try to disassemble it with a thin screwdriver or a knife.

Office buttons

Buttons separated from the PCB is easy enough, since they do not attach to it. After the button panel is set aside, the board should be placed on dry flat surface (for this you can take a paper towel).

Cleaning board

In order to successfully clean the board and keep it working, you need to choose the right means by which it will be performed. Water will not work, its use is strictly prohibited.To clean the boards used alcohol or special agent, which is intended for cleaning oxidized contacts. It can be found at any electronics store.

Detergent gently sprayed on the surface of the board. If alcohol is used, then they are moistened with a tampon, and then all the elements of the printed circuit board are wiped. After removing dirt from the surface, remove all traces of cotton from a tampon. There is no need to dry the board, since such solutions evaporate very quickly from the surface.

Clearing the remote buttons

To clean the buttons of the remote can be used (except for the above tools) soap solution. It is prepared from warm water (two measuring cups) and one tablespoon of dishwashing detergent. The solution should be carefully placed. When cleaning, a cotton swab or toothbrush is used. After the buttons are cleaned, they should be thoroughly dried or wiped. microfiber cloth.

Drying is required if the buttons are cleaned with a solution with dishwashing detergent.

Assembly

After all the parts are clean and completely dry, you can assemble. It runs in reverse order:

• at first buttons are installed on the printed circuit board;
• then the console itself is assembled;
• screwed all the screws;
• The battery is inserted.

Quick clean outside

There is a category of people who are absolutely afraid to disassemble any device, including the remote control. They should be limited to regular cleaning of the device outside: it is also fully capable of keeping the remote control in good condition. For such a procedure, you can take wet wipes or cotton swabssoaked in alcohol or vodka. Those who find it difficult to clean the buttons with a cotton swab are allowed to see it with a toothpick, on the edge of which it is worth wrapping some cotton.

It is important to remember that the remote control washing is prohibited with water, as this can lead to oxidation of the contacts, and he generally stop working.

Terms of use control

If the console does not work as fast and well as before, then first of all it costs check batteries. Very often, they are the cause of such situations, and not penetrating the dirt. If after replacing the batteries and external cleaning of the case, and the device does not work fully, then you need to carry out thorough cleaning the inside of the console. If this does not help, then you need to take the remote specialist, try to hold DIY repair or buy a new remote control device.

To extend the life of a remote device, you should follow simple guidelines.

1. To protect the console from erasing the surface, and contact with it of food and liquid debris, as well as dirt, you should buy special case of polyurethane.
2. If you can not buy a case, you can make it yourself. from polyethylene. You will need to wrap the remote in a simple package, and glue the ends with scotch tape.
3. To prevent the console from becoming dirty, it should be taken only with clean hands, and also always put in the space reserved for it.

As it became clear, cleaning the console is quite simple. A child can cope with this task. Of course, there may be situations where the board is flooded and the contacts are spoiled. In this case, it is worth comparing the cost of possible repair and the price of a new device, and then the choice is up to the owner. By the way, you can control the TV without getting up from the sofa, and in the absence of the remote. In this case, your assistant will be any smartphone, just need configure it to control tv.