Why the headphones on the phone stopped working

Such an accessory, like headphones to the phone, very often brings its users. And this concerns not only cheap mobile phones. The headset from the iPhone also tends to lose the sound completely or partially. Damage may be of a different nature, and the time of a manufacturing defect is not excluded. Let us consider in more detail why the sound in the headphones deteriorates, or they do not work on the phone at all.

Causes of headset malfunction

If a pair of headphones fails, the cause may be not only damage in the device itself, but also in phone. To check this factor, you need to connect the headset to another source. If the playback is absent, then the problem with the mobile. Also, if the headphones are not designed for different models, they may simply not coincide with the connector of the mobile device.

This is more true for older models, since new androids and iPhones are more versatile, and one pair fits the entire series of phones.

So, if the headphones are working from another carrier, then the problem is with the sound source. The most common causes are:

• microcircuit or board is broken - damage can be caused by the phone falling from a height;
• mobile can “not see” headphones due to software failure;
• moisture ingress into the device;
• problem settings in the phone.

When there is sound, but it is partial or with noise, the problem is definitely with the headset. So, only the left or right earpiece can work. Playback can be carried out with impaired channel decomposition, or there is extraneous noise and crackling. All of these factors are usually caused by the following points:

• the cord is often confused, therefore there is a high probability of its damage;
• mesh liner clogged;
• the connector is damaged or loose; therefore there is no contact with the mobile phone.

If there are no mechanical damage, the cause of idle headphones may be a defect in the accessory.

Why don't Apple headphones work?

Fans of iPhones often face the problem of incorrect operation of the headset.After a short period of operation, the sound may be partially lost, namely, the reproduction of the sounds of individual frequencies. A frequent problem is the failure of the right earpiece, on which the sound control and voice accessory are located. As practice shows, it is necessary to look for a new pair of headphones. As a temporary option, you can switch the headset to mono playback. To do this, go to the settings of the iPhone and through the menu "Universal Access" to change the setting to mono audio. This will play mono signalthat includes the sound of two channels. The quality will be noticeably different, but this will allow you to listen to music from the right and left speakers, and not from one of them.

If the headphones on the iPhone do not work at all, the reason can be easily remedied.

1. Failure in the operating system. This happens when the software cannot determine when the headset is connected. The situation can be saved by flashing the mobile device shell. Sometimes it is enough to reset the settings to the factory settings.
2. Nest damage. Due to frequent use, the connector may loosen, which prevents the portable device from making full contact with the source.This problem is easily solved: headphones can be repaired at a service center.

Buying a new headset for a modern mobile phone in the event of a breakdown is not a problem. But is it worth the extra cost when the problem may not be so serious? Before you think about a new purchase, it is better to check everything, identify all possible factors that led to the malfunction, and then draw conclusions and make a decision.