10 best drills for home and work in 2017
The perforator is a tool that allows you to remove the old plastering layer, disassemble a wall or ceiling from brick, concrete, cinder block and a number of other materials, as well as drill or drill holes in them, make recesses. The product range is represented by a variety of battery and network models from different manufacturers, designed for both home and professional activities. The performance characteristics of the power tool, as well as its price, fluctuate in a wide range of options. For this reason, it is quite difficult to choose the right device on the market. The rating of perforators in terms of reliability for 2017 will allow you to choose the right tool for household or professional use.
Content
10. AEG KH 24 XE
The classic three-mode perforator model from the German company AEG opens the rating. This tool allows you to drill holes of small and medium diameters in different materials: up to 24 mm in brick or concrete, maximum 13 mm in metal and 30 mm in wood. The model differs in the small weight, equal 2,6 kg, and convenience of operation. In AEG KH 24 XE, FixTex technology is implemented, providing keyless cartridge locking. This allows you to quickly replace the standard SDS + with the chuck supplied with the product. The power of the device is 720 W, and the impact force is 2.3 J. Among the tools intended for home use, the AEG KH 24 XE is of good quality, reliability, which allows them to work in heavy mode.
- small weight of 2, 6 kg;
- long power cord (4 m);
- good balance between power and impact;
- sold in a case with drill chuck included;
- the model is implemented FixTex technology;
- no chuck beats;
- availability of reverse mode.
- the reverse switch is inconveniently located;
- button that locks the power tool in the on state, small size.
Prices AEG KH 24 XE:
9. Hitachi DH22PH
At the ninth position, the Hitachi DH22PH puncher is a demanded device for home or construction work in the country. The model operates in 3 modes. Low weight allows you to use this power tool for a long time, keeping it on weight. Hitachi DH22PH belongs to the category of low-cost low-power products with an impact force equal to 1.4 J. It can be used to drill a hole with a cross section of 22 mm in concrete or a brick, and in a tree - up to 24 mm.
This model of the puncher is in the middle between household products with a limited operational resource and professional electric tools.
- small size, compactness;
- ergonomic (comfortable) handle;
- you can smoothly adjust the speed;
- low weight allows you to do a long time work with this tool at a height.
- relatively weak impact force allows you to perform only a limited range of domestic work;
- no reverse mode.
Prices Hitachi DH22PH:
8. DeWALT D25133K
Continues the top 10 punch DeWALT D25133K. It is a reliable, powerful enough (800 W) model with a 2.8 J blow that can withstand significant workloads. The tool is equipped with a safety clutch that protects it from damage when the working nozzles are jammed. It is believed that DeWALT D25133 K is the best plug-in punch in its price category, designed for intensive work of various kinds: drilling, chiseling. The tool is notable for its successful design, high quality of assembly and component parts, as well as safety during operation. It behaves well with constant use in the construction sites. At the same time on the body is located additional handle and rubber linings, which compensates for the absence of an anti-vibration system.
The peculiarity of the model is that the slotting mode is activated only if you press the nozzle onto the work plane. In some cases this may complicate the work.
- the operating mode switch is clearly set in each position;
- high performance;
- big operational resource;
- convenient location on the case of the reverse switch;
- high-quality assembly and parts.
- In the early versions of the product there is no button for fixing the tool in the on state.
Prices DeWALT D25133K:
7. Bosch PBH 3000-2 FRE
At the 7th place is a universal model equipped with a two-speed gearbox from Bosch.The functionality of the power tools allow you to perform well drilling work, as well as hammer holes. Bosch PBH 3000-2 FRE can operate in four modes. The device kit contains a replaceable cartridge for drill diameters up to 15 mm. With an impact force of 2.8 J, the power of the product is 750 watts. On the starting key Bosch PBH 3000-2 FRE is located electronic speed control.
The versatility of the model lies in the fact that it can work as a drill due to the presence of two speeds when drilling.
Also, the device has the function “Vario-Lock”, turning the chisel, which is convenient for working with it.
- presence of two speeds when drilling;
- high-quality assembly;
- good ergonomics;
- complete with a device has a drill chuck;
- good ratio of power to impact.
- inconvenient placement of the speed controller;
- very close location of the mode and speed switches relative to each other.
Prices Bosch PBH 3000-2 FRE:
6. Interskol PA10 / 14, 4P-2
The ranking of the best continues to be a battery-powered, lightweight punch from the Interskol budget range, which combines versatility and advanced functionality. Compact size provide the ability to access power tools in various hard-to-reach places where wire analogs do not fit. Low weight (1.4 kg) is provided by using Li-on batteries of the modern type. It is very convenient during the work, and also allows to carry out easily actions with one hand. Interskol PA10 / 14, 4P-2 is the best perforator in terms of the ratio between price and quality, designed to operate in a variety of conditions.
Included with the device is adapter for fixing bits. This expands the functionality of the model, allowing you to use Interskol PA10 / 14, 4P-2 as a screwdriver, if necessary.
- availability of replaceable, not built-in batteries;
- electric motor brake equipment;
- tool batteries are quickly charged;
- comfortable design;
- minimum size compared to similar devices.
- small battery capacity;
- insignificant amount of impact force.
Prices Interskol PA10 / 14, 4P-2:
5. DeWALT DCH133N
The model from the famous German manufacturer belongs to a number of the best drills with batteries, with high performance. The DeWALT DCH133 N is distinguished by a shock of 2.6 J and a good amount of power for non-networked models. With this power tool, a hole of 26 mm diameter can be made in concrete. The device is intended for use in professional working conditions. The product is equipped powerful battery pack high-capacity (4.0 A / h) voltage of 18 V. DCH133N is able to work in three modes.
The user’s safety level when using the tool is enhanced by the presence of a safety clutch.
- device performance is comparable to network tools;
- small weight;
- equipment capacious battery;
- reliable, high-quality impact unit;
- The mode switch is clearly fixed in the working positions.
- The battery must be purchased separately from the instrument, because it is not included in the scope of delivery.
Prices DeWALT DCH133N:
4. AEG BBN 12 Li-401C
On 4 positions battery model from AEG, which is durable, but the power elements are not equipped with a memory effect. The device can operate in two modes.
The presence of an adapter (special adapter) for bits allows you to use AEG BBN 12 Li-401C as a screwdriver.
The practicality of the power tool is caused by its small weight (1.7 kg) and the convenient placement of the reverse switch. Low weight as well as compact dimensions allow work to be done. in limited spatial conditionsholding the tool on the weight with one hand. Due to its improved design, it is possible to install various additional component parts and accessories on the product, for example, a high-capacity battery, a dust removal system.
- works independently of the network;
- you can quickly rearrange the cartridges;
- good basic equipment.
- The kit contains only one battery.
Prices AEG BBN 12 Li-401C:
3. DeWALT D25601K
Top 3 opens model D25601K. In the middle category, he is considered one of the best network drills. The product is equipped with the same systems to improve performance and safety, which are their counterparts with a greater amount of power. The device combines a number of innovative technological solutions. Choosing a D25601K puncher from DeWALT with a capacity of 1.25 kW and an impact force of 12 J provides quiet work. This is due to the presence of a good protective system from the action of vibrations.The power tool is able to withstand significant operating loads due to the fact that its gearbox is constantly in oil.
For visual control of the degree of wear of the brushes of the electric motor, the DeWALT D25601K is equipped with special sensors.
Compared with tools of a similar category, its weight is lower. The model is well suited for work with crowns up to 100 mm in size.
- low noise level during the work;
- good anti-vibration system;
- high degree of reliability;
- ease of use;
- manufacturability of the design.
- high cost (about 30,000 rubles);
- equipment contains a minimum set of parts and spare parts.
Prices DeWALT D25601K:
2. Makita HR5201C
Silver gets reliable industrial hammer drill from Makita, designed for long-term work with increased operational loads. High power (1.5 kW) accelerates drilling. Thanks to the sds-max chuck, nozzles of various sizes can be used. Makita HR5201C easily drills and hollows concrete with a brick. Convenience of work is additionally provided by the presence soft start systems, which reduces the burden on the user.The safety of various work operations contributes to safety clutch, which when jamming the nozzle prevents turning and the initial jerk of the power tool. The possibility of fixing the power button in the clamped position allows you to firmly hold the working device with two hands.
- high-quality, reliable assembly;
- high power;
- extended power cable (5 m);
- the ability to adjust the speed;
- fixing the start button;
- ability to withstand high operational loads;
- good value for money among professional tools (the cost is about 40,000 rubles).
- there is no possibility of reverse movement of the nozzle;
- there is no vibration damping system;
- expensive consumables of acceptable quality;
- heavy, bulky model.
Prices Makita HR5201C:
1. Bosch GBN 8-45 DV
The best punch in the ranking is presented by Bosch. GBN 8-45 DV is powerful (1.5 kW) and very durable equipment professional category which is designed to work with solid materials, such as stone. Using new technology,The manufacturer has equipped the product with an advanced vibration reduction system. This for the operator greatly increases the degree of comfort when performing work operations. A safety clutch protects the user from shocks and scrolling. If you take the most reliable professional similar models, then among them Bosch GBN 8-45 DV occupies a leading position.
- high performance;
- the ability to control the speed of rotation over a wide range;
- equipment with modern systems that increase the safety of work with power tools;
- ergonomics, providing the maximum degree of convenience during long-term drilling or slotting holes.
- high cost (about 50,000 rubles);
- minimum level of equipment.
Prices Bosch GBN 8-45 DV:
Conclusion
In 2016 and 2017, as before, among the leaders are products from Bosch, Makita, DeWALT, AEG, Interskol, Hitachi, distinguished by quality and reliability. To choose a punch stands, focusing on the manufacturer and the estimated intensity of its operation. For use at home You can purchase budget products from the above manufacturers.Their functionality is quite enough for a short variety of domestic work. The models that occupy the first places in the list are industrial, professional equipmentcharacterized by high price. With their help, you can perform a variety of operations with very hard materials. They withstand significant stress loads. If autonomy is important, then considered battery devices will do.
/rating_off.png)
Loading ...