Features of the AP-1 water activator

"Living" and "dead" water exists not only in fairy tales. The capabilities of the modern AP-1 water activator make it possible to turn ordinary H2O into a therapeutic fluid, the effect of which is experienced by living people, and not fictional characters.

How does the "magic"

In fact, there is nothing magical. Activated water is obtained by the action of the electrodes included in the device. It is enough to turn on the device in order to get the desired result in a certain time - catholyte or anolyte.

What is useful catholytic solution

The activator of water under marking of AP-1 can produce alkaline liquid - catholyte, which is called "living" water. It participates in the stimulation of bioprocesses, helps to dissolve other substances.High activity in relation to absorption and chemical processes has been observed. To taste catholyte something like water after rain.

The electroactivator of “living” water AP-1, the scope of the catholytic component is simply impressive:

• accelerates wound healing;
• stimulates metabolism;
• increases pressure;
• improves the interest in food and the work of the digestive system;
• helps to fight various diseases (from allergies to erosion on the cervix);

The catholytic result with a negative anode helps even in the household with:

• sterilization of cans used in further rolling;
• sanitation of rooms;
• seed disinfection;
• stimulate rooting and improve plant growth;
• preparation of solutions for construction;
• assistance in the productive growth of chickens, ducks and other domestic animals;
• increase the shelf life of food products;
• fight against scale deposits on kitchen utensils and autoradiators;
• extending the life of various types of batteries.

Another useful quality is harmlessness and non-toxicity.

There is only one drawback - the water quickly loses its healing qualities. However, if you provide storage in a dark corner and prevent the ingress of oxygen, then all of the above will be valid even in a week period.

Anolyte utility

Despite the title of "dead", anolyte water, of course, does not kill. On the contrary, it is very powerful antisepticable to slow down pathogenic biological processes.

Water having a positive charge is used for such purposes:

• when used internally to lower blood pressure, slow down metabolic processes, reduce joint pain;
• in external use, it is relevant for the disinfection of bandages, the destruction of microbes and suppurating wounds;
• remove tartar without damaging the enamel;
• for food processing (talking about fruits and vegetables);
• destruction of fungi and microorganisms.

How the device works

Any such apparatus is such parts: power supply, main bowl, ceramic cup (we will insert into the container) and the top cover with electrodes (removable element).

The device operates according to the following principle.

1. The glass is installed in the central part of the bowl.
2. Water is poured into the container - it is necessary to ensure that there is at least 10 mm left up to the edge of the glass.
3. Install the top cover with the coincidence of the arrows (they must be located opposite each other). The black anode goes inside the glass and the light anode goes outside.
4. After complying with such checks, the top is lowered with a gentle movement to the stop.
5. Now you can turn on the device in the network. About the correct device activator says the glow coming from the indicator on the electrodes, and gas bubbles.
6. The only negative - you need time yourself. Forty minutes is usually sufficient to obtain a solution of the desired concentration (the longer the work, the longer it is).

The main advantage of the resulting liquid is its naturalness without the addition of chemical impurities.. The entire separation of the water structure inside will take over the middleman - the porous material of the glass. Both types of liquids can be used by both adults and children. But it is better to do this no later than 8 hours after receiving the result, after this time the useful activity will disappear.

The difference between the models

To date, several modifications of the device in question are on the market. How are they different? First of all, technical improvements.

1. AP-1 water activator in version 1 - the simplest of the "fellows". Execution 1 means that in about half an hour it will be possible to get one and a half liters of water with useful properties.
   

2. AP-1 water activator in option 2 It differs from the very first version by the presence of the arrow indicator of water saturability. The rest is the same light and mobile household appliance, in which in 20 minutes you can get the activated water of the desired concentration. Another version of it is the 2T model, in which the cathodes are made of titanium.
   
3. AP-1 water activator performed by 3 differs from the AP water activator version 2 in that the electrodes in it are covered with a special solution - it is able to improve the electrolysis procedure. Also, this innovation advantageously prolongs the life of the device itself. Another bonus is 1.7 liters of volume of processed water at the outlet. The 3T version implies the presence of ultra-pure titanium cathodes. Such a device model 3T is one of the latest and most advanced developments.
   

Whatever model the potential buyers decide to stop, one thing is clear - the use of the product from the operation of such a device will have a positive effect on the health of all family members. And it will be seen in a fairly short time.