How to make an electric jigsaw on a tree

It is no secret that things made by hand have special value. Cutting wood on an electric jigsaw makes it possible to create something original. Such a thing can be a decoration for your home or an excellent souvenir. An electric jigsaw woodcarving makes it possible not only to create something interesting, but also to express oneself.

Device device

Learning to work on a stationary device is not an easy task. But if you firmly decided to start making something with your own hands, then you need to be familiar with the device technology:

1. In order to manage the process and create the right direction, the tool is equipped with a base plate.
2. To start sawing, you need to install a special file with fine teeth. Depending on the type of work, it can be changed.
3. Jigsaw carving is possible due to the fact that the device is equipped with a motor.
   

   Power tools can vary from 200 to 900 watts. Much depends on what kind of material you are going to cut.

4. To cut the material was the most convenient, the tool is equipped with a handle.
5. To correct the movement of the saw on the electric jigsaws set guide sponges or rollers.
6. In order to start sawing, you must click on the "start" button. It is important that for the jigsaw to work it is not necessary to clamp it all the time.

Jigsaw device

In addition to standard equipment, many devices are equipped with a backlight, high-quality protection, a function to blow off chips or a cap of sound. All these additions are not necessary, but greatly simplify the work.

Cutting Tips

Of course, to create serious work will take a lot of time. A good jigsaw, can be used for artistic cutting, and for simple construction work. To work without any problems, follow these rules:

1. In the process, it is recommended to focus in the lumbar region.So you can cut and in a sitting position, and in a standing position. In addition, in this position, you can hold the canvas.
2. To cut a small area, it is necessary to make a hole in the part into which the saw is inserted.
3. In plywood it is easy to make a hole with the help of awl. But in a strong bar hole will have to be drilled.
4. All your movements should be smooth. Take your time in the work.
5. For figure cutting, it is important when changing the angle, to turn the canvas itself, and not the tool.
6. After you have finished cutting, you need to process all the edges of the part. As a rule, many irregularities and roughness remain in the process.
7. To create a complex openwork pattern, you need to work a lot. Beginners easier to start with simple shapes that do not require serious effort.

You can decorate with this product a lot, for example, a casket, photo frame, interior items or furniture.

Advantages and disadvantages of the tool

Any technique is imperfect. Of course, using an electric jigsaw is much easier than using a hand saw. Before you decide to purchase such a tool, you need to understand for what purpose you will use it,and understand the pros and cons of the device.

Advantages:

1. It is now possible to purchase high-quality devices at a relatively low cost.
2. The simplicity of the equipment allows the material to be cut even by a beginner.
3. As a rule, manufacturers focus on universal models with a great depth of cut.
4. You can purchase various accessories that will facilitate the work.
5. Thin blade allows you to cut these masterpieces.

Disadvantages:

1. In the process of working with a thick cloth, it is difficult to pull out sawdust.
2. When working, you must comply with safety regulations, as the saw is not equipped with a protective mechanism.
3. Due to the fact that the saw is fixed only at one end, it cannot be made sufficiently thin.

The electric jigsaw works best with thin materials. If you need to cut a plinth, rail, parquet board, then this tool is perfect.

Safety regulations

For any equipment there are rules of operation, as well as safety standards, which are simply necessary to comply with. When working with jigsaw, it is important to ensure that:

1. The handle of the device was comfortable and you were wearing safety glasses.
2. The emphasis was as strong as the work surface.
3. The mount was high quality.
4. The work was carried out with the right lighting.
5. The process of cutting began with the instruction.

Do not forget that you can not bend too close to the device!

Conclusion

Work with jigsaws can both professional and beginner. Mastering the process is not difficult at all, and you will learn how to create beautiful complex patterns with time. The main thing is to be patient and not to forget about constant practice.