The right choice of built-in refrigerator - a guarantee of no problems.

In any apartment, the kitchen is the room where the family spends the most time together. It is here that guests are greeted and celebrated holidays, therefore, increased requirements are made to the interior of this room, the main of which are comfort and free space. To achieve the goals helps embedded technology, so the question of how to choose a built-in refrigerator, every year becomes more urgent. So, what should you look for when choosing?

The size

Most often, the equipment is purchased under the existing furniture, so before buying it is necessary to remove its size, because the slightest discrepancy leads to unnecessary costs.In addition to the standard parameters of the height and width of the cabinet, you should consider and its depthBecause the refrigerator should not only fit completely into it, but also have a reserve of space for air circulation around the condensers.

If you decide to purchase a refrigerator first, and order a furniture for it under the master, then more possibilities appear. In this case, the choice is directly dependent on your preferences.

Standard models of built-in refrigerators have a width of from 54 to 58 cm, and height - from 50 cm to 2 m.

Refrigerators up to 80 cm high, as a rule, can easily be placed in ready-made kitchen cabinets. At the same time, it is necessary to pay attention to their location, since a special valve is required for timely cooling of the condenser refrigerator, which is installed under it, that is, in the basement section of the cabinet.

This type of embedded technology, as well as solo models, fall into two categories:

• single chamber, only cooling food, without the possibility of freezing;
• two-chamberwhere products are cooled in one chamber and frozen in the second.

When choosing, of course, preference should be given to two-chamber models, which allow keeping products fresh as long as possible.

Doors

Another important criterion that requires close attention when choosing a built-in refrigerator is doors. Here you need to pay attention to which doors are installed in the closet, and in which direction they open. In most cases, in the kitchen cabinets for built-in appliances, the doors moving on the runners are installed. The disadvantage of this cabinet is the possibility of opening the door of the refrigerator only 90 degrees. If the cabinet doors are mounted on hinges, when choosing a refrigerator, you need to take into account the size of its doors, they must be completely the same size.

Embedding Features

When choosing a built-in refrigerator should pay attention on its front panel. If there is a touch or mechanical control, it should always be open for quick access. Without it, you will not be able to monitor the temperature inside it in time.

power usage

According to the amount of energy consumed, refrigerators are divided into several classes. Each of them is assigned the corresponding letter of the English alphabet from A to G, where A is the most economical, and G - on the contrary, the most costly.Despite the fact that class A equipment is rather expensive, it still needs to give preference, since the cost of its purchase will be more than refunded during operation.

How important is the appearance of the device?

The undoubted advantage of the built-in refrigerator is the absence of the need for selection in color or any other external parameters, because it will be hidden from prying eyes. The main parameters for embedded models of this type of device, as well as for solo models, are power consumption, defrosting system and control method.

Defrost system

In total there are three systems of defrosting, however, in modern devices only two of them are mainly used:

• manual;
• drop;
• no frost.

The manual system was used earlier; in modern technology, only the drip system is found and no frost.

The main difference between these systems is that with a drip system, it is necessary to clean the outflow paths from time to time, while with the system no frost there is no need for this action.

Control method

Choosing a refrigerator, you need to pay attention to the way to manage it: mechanical or electronic.With a mechanical thermostat, as a rule, is located inside the device, and with electronic - in front, on the door. Regarding the built-in refrigerator, models with mechanical control will be more practical and more convenient.

Conclusion

How to choose a built-in refrigerator? - quite a difficult question, however, if you carefully examine it, there will be no problems with the choice. For proper selection you need to remove the following dimensions of the kitchen cabinet, which will be built in the refrigerator: length, width and depth. Consideration should also be given to the fact that a compression refrigerator is required basement compartment in the cabinet for the valve, ensuring its timely cooling. Particular attention should be paid to the cabinet doors, because if they are mounted on hinges, then the refrigerator doors should fully correspond to their sizes.