How to install a built-in oven in the kitchen

In the modern world, no kitchen can do without a stove, be it gas or electric. Housewives increasingly prefer embedded equipment due to its functionality. However, such devices require proper installation. On how the oven will be installed, will depend on the correctness of his work and your safety. It is not necessary to invite the master to install the oven: the built-in oven is easy to install with your own hands. To do this, you need to make a little effort and maximum attention.

Varieties of ovens

To begin, let's see what are the ovens. There are the following types of equipment.

1. Dependent ovens.
   
2. Independent equipment.
   

Installing the first is impossible without a hob.When choosing the second type, the built-in oven can be installed without the use of a hob.

Also ovens can be gas or electric. The installation of a gas oven is not at all different from the installation of a built-in oven, powered by electricity. You can embed the technique and by myself.

For connect the built-in oven to electricity or gas should be resorted to by a professional in order to avoid electric shock or gas leakage.

Equipment installation

Installation of any equipment is carried out in several stages:

1. Preparation tools.
2. Preparation of the workplace.
3. Installation of the device.
4. Connect the oven.

Instruments. To integrate the oven into the kitchen set you will need: a Phillips screwdriver, a drill, insulation, a paint knife, a fork, as it does not come with the equipment.

Concerning workplace trainingthen you need to think in advance where you will install the oven. We are accustomed to the traditional installation of the appliance, when there is an oven under the hob. How to install differently, you ask? You need to break your stereotypes and be guided not by the generally accepted rules, but rely on the arrangement of furniture and usability of devices.Based on this, many install the oven above the countertop level. As a result, your kitchen will be in line with the new fashion trend, it will be easier for you to keep track of cooking, this will make it easier care device.

Having decided on the place, you need to take care about the right niche size in the kitchen furniture. For this it is not necessary at first purchase a built-in oven. Thanks to the standard sizes of ovens, they can easily be built into an existing kitchen set. The main thing is to have a niche level. The presence of even a small skew may cause damage to the electronics and improper distribution of heat (in the case of a gas oven).

Oven measurements under the niche

Installation Between the installed oven and the niche, to prevent overheating of the furniture, which can cause a fire, should be gaps. They will provide air ventilation. Behind the device you need to make a gap of 5 mm, on the sides - 5 mm and bottom - 10 mm.

Connection

Special attention needs to be paid electrical wiring, in the event that the oven being installed is electric. Wire cross-section should correspond to the device power.You also need to decide how you will connect the device: directly to the wire or into a wall outlet.

When choosing the second method of connection, you will need a plug (usually not necessary here, due to the high power of the oven) to 40A with ground connection. It needs to unleash. Then strip the three-core cable. The blue and red wires must be connected to the “phase” and “zero” contact groups, and the remaining white is fixed in the “grounding” connector (the colors of the wires may be different). We collect the plug, which is then plugged into a power outlet that can withstand the power of an electric oven.

Electric oven cable labeling

Now insert the oven into a niche. We adhere to the above described indents. Next, the built-in oven needs fixing. To do this, open the door of the device and find the mounting holes. Using a screwdriver or a cross-head screwdriver and four screws, fasten the electric oven to the walls of the niche. The built-in electric oven is ready for operation!

As for the connection of the gas oven, for the sake of their safety, it is better to invite a specialist.

With a flexible gas hose, he connects the oven to a gas pipe.In this case, the device is installed at least 1.2 meters from the gas source. But even here, we cannot do without electricity, because ignition and lighting will not work without it.

It does not matter from which power source the device works, before it is first used calcine for half an hour. Then, after the final cooling, wash all the walls of the device and wipe with a damp cloth.

Acquire multifunctional built-in ovens and enjoy the process of cooking your favorite dishes!