Installing the soundbar on the wall

The soundbar is the best option for smaller rooms. In terms of sound reproduction, it, in fact, performs the functions of a full-fledged home theater, it only takes up much less space in the room. But how to install a soundbar so that at the same time it is easy to use, does not interfere and looks great in the interior? There are several good solutions for placing a sound bar in a room. We will present the possible installation options and dwell in greater detail on how to correctly and quickly hang the soundbar with your own hands on the wall.

Where it is better to install soundbars

The sound panel, as a rule, is made in an elongated one-piece body and is a long elongated bar, equipped with a processor, drivers, sound amplifiers and various connectors. Often they are purchased separate subwoofer. Many modern models have a built-in or wireless subwoofer in the kit.

In other words, the soundbar is a complex two- or three-channel system (there are also more advanced six-channel and seven-channel panels) capable of reproducing rich and surround sound, replacing the acoustics built into the TV. The design and dimensions of the soundbar can vary greatly: it all depends on the specific model, manufacturer, functionality and cost. Anyway, buying a device, it is best to take care in advance about where to place it later.

The soundbar can be installed on the wall under or above the TV, or it can be placed on a stand-stand in front of the TV device. Another option for fireplace owners is to place a panel. on the mantelpiece. However, it is undesirable to connect the device away from the TV case, because in this case the sound will be slightly muffled and the illusion of surround sound will be lost. According to the owners of sound panels, the placement directly under the TV also negatively affects the quality of the reproduced sound.

When placing the soundbar under the TV case, the upper sound frequencies are perceived much brighter and more voluminous.

Also worth noting are the sound bar types: acoustic stands or acoustic pedestals. They look like flat cabinets of different dimensions (it all depends on the model and manufacturer), equipped with a real acoustics system, a receiver and even a built-in subwoofer. TV, by the way, can be put directly on them, and in this case the sound quality will not be affected.

Installation on the wall: step by step instructions

It is necessary to mount the TV simultaneously with the soundbar. If the TV is already hanging on the wall, you will have to remove it and start assembling the kit with the panel. The wall must be strong, so for a start, make sure that it can bear the weight of the mounted devices. Taking into account the type of wall, select the necessary dowels, screws and screws.

You can attach the soundbar to the wall using a bracket designed specifically for wall mounting. Often the soundbar bracket comes in set together with the purchased device.

Installation Instructions:

1. The sound bar must be installed at a distance of at least 10 cm from the TV.
2. Rest the bracket against the smooth surface of the wall and attach with a pair of screws. If you place the panel under the body of the TV, make sure that the arrow pointing up (usually it is shown on the bracket) is located exactly in the center of the TV.
3. Try to dock the screw holders with the corresponding screw holes on both sides of the main soundbar block. Secure them with the attached screws.
4. Install the panel into the required bracket connectors. In order to ensure the reliability and strength of the mount, check that the mount studs are located at the very bottom of the connectors.
5. Next comes the connection of the soundbar. Panel cables are connected immediately during installation, because then, most likely, it will be difficult to get to the connectors.
6. There are rules for connecting. The most convenient way is to connect the soundbar using the HDMI interface, or through the optical and coaxial inputs (more often this is done if your device model is not equipped with HDMI). The most detailed and illustrative instructions on how to connect the soundbar after installation can be viewed in the video format, then you just can not go wrong and do not confuse cables and connectors.

Useful recommendations

When installing a sound panel, you must comply with the following rules:

1. After installation, make sure that the fasteners are installed firmly. Do not subject it to shock, do not put extra weight.
2. Check that the device’s cables are out of the reach of children. If the child, for example, pulls the cables, then the soundbar itself may collapse.
3. Do not install the sound panel and subwoofer in rooms with high temperature and humidity. It will break the operation of the device.
4. For best soundbar sound system performance, keep the prescribed distance from the TV cabinet. Positioning the device at a distance is also not recommended.
5. Remember that the bracket is always mounted on a strong, flat and smooth surface.
6. Before connecting to the connectors on the TV case, make sure that all safety regulations are observed.

The circuit switching TV and soundbar

The soundbar is a wonderful addition to any TV, be it a simple budget model or the most sophisticated system with Smart-TV. The fact is that a real spatial sound with the effect of the environment will always be only an advantage, and only a high-quality sound panel can provide it.We hope that our advice will help you deal with the installation yourself, and the installed soundbar will please you with excellent work!