Proper storage of headphones protects against tangle

Many music lovers who do not part with it anywhere, and constantly use headphones, are faced with the most common problem: the accessory is confused. Immediately, the question arises how to make sure that the headphones are not confused and do not break. It’s not worth explaining why headphones get entangled, because carrying it in your pocket and among the things in your bag makes this easy. With a long and careless unraveling in a hurry, you can even break the rather fragile wires. Therefore, knowledge of how to properly store headphones, so that they are not confused, will be useful to many.

How to twist the wires

There is a fairly simple way, which will tell you how to make sure that the headphones do not break and are not confused, and are easily and quickly accessible for use. The method is very simple, everyone will cope with it.

1. Fingers add up in the form of a goat (little finger and forefinger unbent, and the rest remain compressed).
2. Between the little finger and the index finger clamp the beginning of the headphones, and the wire begins to wind around the fingers of eight.
3. Then the remaining end is wound on the center of the twist, and everything is ready. The gadget can be safely placed in your pocket, the wires will remain neatly coiled, and also easily unraveled.

This is the easiest way to protect the wires - with such storage they are not confused. But today there are a lot of other options under which the accessory also does not break.

Cardboard to help

If you need to place the device in the table, and the tangle of tangled wires is annoying, you should think about how to keep the headphones as convenient as possible using the available tools. To realize the lightest option, you will need to take plain cardboard from any box, scissors. This method is very simple to do it yourself. For the manufacture of such a holder is required only to cut out a cardboard figure in the form of a bone. And then everything is simple: the wires are wound on the center, neatly fixed.

Old lipstick can come in handy

To organize the case for storage of headphones, so that the wires are not tangled, you can use lipstick covers - in any house there will definitely be used lipstick.

1. The device wires are wrapped around the three fingers in a tight ring so that the plug and the inserts are at the bottom.
2. Then the upper edge of the twist should be put into the cover. Sometimes it is difficult to insert wires from the first time, but this is better: the headset will stick tightly inside the case. It is worth a little twist - the wires will be in place.

Plastic card

How to make the headphones never get tangled? Make for them special case. Practically everyone has an unnecessary or non-working plastic card, for example, a discount or expired card. It can be used with benefit. It can make a great headset case. In addition to the card, you will need a regular hair tie.

1. The elastic is stretched along the map in length so that it is located in the center.
2. Then they are wound around the fingers so that the coiling is round.
3. The headset is gently inserted between the card and the rubber band. To make it easier to do, you should bend the card in the form of a pocket at both ends.
4. The field of how the accessory will be placed neatly in the right place should stop squeezing the edges - now they will hold the gum.

The accessory, wound up in this way, is convenient to store, even to carry in the pocket of jeans. The wiring remains neatly folded and does not break.

Knowing such simple ways, now you can be calm - your favorite headset will remain neatly folded and easily unraveled. Devices will be in working condition at any time.