How and what can fill an e-cigarette

A large number of tobacco smokers have begun to switch to the use of electronic cigarettes. They understood that nicotine offered by the tobacco industry can be introduced into the body not only with the help of smoke, but also through inhalation of steam. In an electronic cigarette (wipe), a nicotine-containing liquid is converted into a vapor substance, which the parisler inhales. We will discuss what these fluids are and how to fill them correctly.

When you need to fill the vape

Liquid for soaring (swill or fill) is poured into a special container - cartridge. The design of the latter may be opaque or transparent, as is the case with clearomizer. The transparency of the container allows the user of an electronic cigarette to visually observe the liquid (its level). But, if the cartridge is opaque, then the moment when the vap needs to be refilled, or there is no liquid in it at all, can be determined by the following features.

1. While soaring little steam is produced. By the way, such symptoms can occur when the battery is almost discharged. Therefore, first charge the battery and try to tighten. If vaporization is weak, then it’s time to refill an electronic cigarette.
2. When trying to hover no steam is produced at all. Again, first check the battery charge level.

You should also be aware that you should not bring the vape to a state where the slurry completely ends. Due to the insufficient moisture of the wick, it can burn. If this happens, then after refilling the cartridge, you will feel an unpleasant burning taste, and in order to get rid of it, you will need to wash the atomizer (evaporator) and replace the wick with a new one.

The variety of models of ES, differing in their design features, imply different ways of refueling devices. Especially the question of how to fill the device, interests beginners hovering. In electronic cigarettes, slurry containers have a different design. Most often, budget wipes have cartridges for filling the smoking mixture into them and modifying them - cartomizers.

Cartridge refilling

The cartridge is a plastic container in which there is hygroscopic filler - synthetic winterizer. In the process of filling this material is soaked with liquid and does not allow it to be quickly poured onto the evaporator. Thanks to the filler, the slurry is consumed dosed. Refilling cartridges is carried out in several most common ways.

First way

This way to fill the container of an electronic cigarette with filling is considered the simplest:

• the container is held with the left hand, in a vertical position (the synthetic winterizer must be on top);
• in the right hand, take the bottle with the dispenser (you can pipette) and drop 3 drops of liquid into the cartridge;

• using a toothpick or unfolded clip, agitate the filler in such a way that the impregnation with the liquid occurs faster;
• do this operation a couple more times.

On average, for filling a container, 3 batches of 3 drops are enough. But in some cases, you can upload more (depending on the model of vape).

It is important to leave the last drop of slurry on top of the padding polyester, and then screw the atomizer to the container. Just this drop will dampen the spiral of the evaporator, and the process of soaring will begin more smoothly.

Second way

The second method speeds up the refueling process:

• you will need to insert a toothpick to the full depth of the container, then press the padding polyester to one of the sides of the container;
• using a pipette or a dispenser, drip the slurry into the resulting void - in this case, the impregnation of the filler will occur from the lower layers;
• at the end of the procedure, straighten the sintepon so that it acquires its original shape;
• Finally, put 1 drop of the mixture on top.

Third way

Refilling the e-cigarette cartridge with liquid in this way occurs with a syringe.

1. It is necessary to type in the syringe 1 ml of slurry. Since some formulations for steaming have a rather viscous consistency, it is better to use a thicker needle that is used for blood transfusion.
2. The needle of the syringe must be inserted into the container along the wall so that its end reaches the bottom.
3. Slowly squeeze the liquid out of the syringe, do this until it soaks the filler from the padding pad and appears on top of it. At this stage, refilling the cartridge is over.

The only drawback of this method is not always the adequate reaction of the people around you to your manipulations with a syringe, if you refill an electronic cigarette in public places.

Fourth way

This method is considered the fastest to fill vape:

• take tweezers with long and thin sponges, and insert it into the cartridge so that it reaches the bottom;
• squeeze tweezers sintepon, and pull it out of the tank;
• holding the empty container vertically, pour in so many fillings in it that there is 4 mm to the top edge of the container;
• again squeeze the liner with tweezers, gently push it into place, straightened, it is well saturated with liquid and locks in;
• using a toothpick, level all the edges of the liner so that it evenly fills the cartridge, especially so that there are no leaks along the walls of the liner.

The life of a filler made of padding polyester, on average, ranges from 6 to 10 refills, as it eventually falls and becomes like sticky felt. In this case, you should purchase an ordinary synthetic winterizer (clean, without impregnation), and change it in a container. A trapezoid-shaped insert is cut from the purchased sintepon. Its length is equal to the depth of the cartridge, the width of the lower part corresponds to the diameter of the container, and the upper part of the liner should be a couple of millimeters wider than the diameter of the container for the liquid. Insert the liner into the container with the narrow side down.

Cartomizer refill

Cartomizers often have disposable design, which includes the atomizer and the cartridge combined in one case. The process of filling the cartomizer can be shown on the example of an electronic cigarette Joye eGo.

1. It is necessary to prepare a syringe, a clip with a curved end (see figure) and slush for refueling.
   

2. Remove the silicone plugs from the case of the cartomizer.
   
3. After that, using the unfolded clip in the shape of the letter “G”, remove the first plastic cap.
   
4. Next, you will see the second stub, which also needs to be removed.
   

5. Having taken a bottle with ready mix for soaring, type it in the syringe in the amount of 1.8 ml.This is the capacity of this model of ES. But there are devices, for example, such as eleaf ijust s, in the tank of which 4 ml of zizka freely enter.
   

6. Pierce the central hole in the cartomizer with a needle and insert it in half, then squeeze out the entire contents of the syringe.
   
7. The assembly is performed in the reverse order, after which the cartomizer is ready for operation.
   

Also, cartomizers can have another design. After removing the silicone plug, you will see a padding polyester stacked around a tube located in the center of the maiser, as shown in the figure below.

Fill with liquid along the wall of the maiserby tilting it slightly and turning it to evenly soak the filler. Avoid getting slurry in the center hole. For a better understanding of how the refueling process is done, see the following. video.

How to choose a slush for vape

Filling for electronic cigarettes can be either with or without nicotine. To give a couple a pleasant taste, special flavors are used. As the popularity of ES increased, the number of different aromas for soaring increased.Therefore, if you are a beginner, it is better not to immediately buy large containers filled, since the selected tastes can quickly get bored. At first, try several flavors in a small package, and, after selecting the flavor you like, you can buy more packaging.

Swill varies in taste in 3 types: berry or fruit, nicotine and tonic. Also, no one forbids making mixes that combine nicotine with many other flavors.

Stamps

Any brand that fills for electronic cigarettes differs from its competitors by its level of popularity. The yield of products in the top popularity may depend on the advertising company, deployed around the brand, the special taste qualities of the products, or simply the information spread among bathers on the principle of “word of mouth”. But, first of all, you should be aware that the taste qualities of the sludge directly depend on the following factors:

• the quality of flavors (in the composition may be toxic substances);
• the quality of the base (the degree of purification of propylene glycol and glycerin);
• the quality of nicotine (it is important in which country it is produced).

Based on many years of practice and relying on reviews of “experienced” vapers, all bathers know that the best manufacturers of nicotine for blends are USA and Germany. But, although there are fills made by India and China on the market, they cannot boast of good quality. The best advertisement for a brand is its longevity (meaning brand longevity at the peak of popularity). Among the old-timers who have not left the top, who are more than 2 years old, can be called such popular brands as Atmose, Intrue Lab, Skills, Mishka-Zhishka and Frisco.

Prices

When choosing a liquid for an electronic cigarette, pay attention to the ratio between the price of goods and tare volume. For example, in the window you can see a bottle of zizka for 350 rubles. with a volume of 10 ml or 420 rubles. With a volume of 60 ml. Thus, you have the right to pick up the slime from the price segment that suits you the most. For example, the products of a well-known manufacturer Humble can be bought at a price of only 150 rubles. for 10 ml. potting that is considered cheap enough.

For example, a bottle of 50 ml of liquid, if you use the device yusts, enough for 14-16 days.

Also, when choosing a fill for an e-cigarette among popular brands, you should not think that cheap zizhka means bad. Among budget fills for wipes Attention should be paid to the following brands: Vape Liquid, Intrue Lab, Red Army, Brusco, Milk Cream, Zizka-Bear, Bubble Gum, Angry Vape.

E-cigarette liquid rating

The most top brands in 2016-2017, producing mixtures for soaring, are presented below.

1. Zizka of this American manufacturer are supplied in large volume containers (120 ml). The company, focusing on such volumes, has become widely known. Also, Humble products have a wonderful selection of flavors, of which any vaper will be able to choose the one that suits itself.
   
2. Doctor grimes. Products of domestic production, has a unique design of the bottles. The contents of the containers, i.e. fillings, are also very high quality. In addition to containers of small volume, bottles of 120 ml are available for the buyer, which are more profitable to purchase than small packaging.
   
3. "Malaysian". This popular name is given zizhkam, produced in Malaysia. Among the most famous brands of fillings can be called such: Maya, Maharaja, Bangswan, Horny, The Ohm. These fillings are distinguished by their exotic flavors and are produced in glass containers, as befits premium products.
   
4. Kangertech is a premium e-cigarette liquid and produced in Canada. It has 8 original and unique tastes.It has 4 grades in nicotine content, ranging from 0 mg / ml to 12 mg / ml. By the way, Evod electronic cigarettes are also produced under the Kangertech brand.
5. MYLK.These are quite “tasty” premium-class products originally from the USA. It can decorate this review with its originality, namely a wide variety of flavors with creamy milky notes. Available in glass containers packed in cardboard boxes with a bottle of milk.
   
6. NKTR (pronounced “Nectar”). The 2017 segment of the premium segment finishes its ranking, deserving a golden pedestal among soaring mixes. Aromas for NKTR fillings were created by the best professional sommeliers and vaping experts. In the manufacture of products, nicotine, which is most purified from TFN impurities, is used, which was specially developed in laboratory conditions.
   

What firm is better, only you are free to judge. Each person has their own idea of ​​which blend manufacturer is the best. Good fills for one vaper category can be disgusting for another. Therefore, it is recommended to try all types of liquids and compositions, the most popular among bathers, and choose for themselves the best.

What else can you refill e-cigarette

Many users of ES, especially beginners, ask a question: advise what else you can pour into the device instead of the liquid traditionally used. Some experimenters are trying to fill vape with water, tea, juice, coffee, and even liquor. But before experimenting, you should know that the use of food for inhalation, can lead to unpleasant results.

1. Since in the above substances no steam components, then you will not be able to complete a full soaring. In addition, if you add any vapor-forming substances to the drinks, and fill the vape with this cocktail, you still won't get the normal flavor.
2. Remember, the lungs are not a stomach. And ingestion to the respiratory organ of food, although in the form of steam, can cause a strong irritation and inflammation of the lungs. Inhalation of alcohol vapors is especially dangerous to the mucous membrane of the respiratory system. This practice is used in medicine in cases of pulmonary edema in a patient to quench the formation of foam, but this is a one-time procedure and not a systematic one.
3. Because of the peculiar consistency and chemical composition of drinks, vape quickly fails, as the wick clogs, carbon forms on the spirals and the latter overheats. In this case, the heating element will have to be changed.
4. If you fill the device with water, then most likely it will fail. In addition, all harmful substances in the water will enter the lungs. For experiments it is better to pour water deeply purified or distilled, diluting it with a little glycerin and propylene glycol. This dressing is called “samozames” and is common among experienced vapers.

How to make samozams

“Samozamesy” among vapers called making liquid for soaring with your own hands at home. Experienced bathers resort to this method in cases when they want to create their own, the best flavor, or to change the amount of steam that is formed during vaping. Also, the pouring for the ES, made by yourself, turns out to be not expensive — much cheaper than the finished mixture.

You should be aware that the standard Zizka contains the following ingredients: distilled water, propylene glycol, glycerin, flavors and nicotine, if needed.

In order to experiment with the amount of steam, you can use several recipes for preparing zizka.

Classic option

This recipe can be used if you want to fill your device and get average amount of steam:

• water (distilled) about 10%;
• propylene glycol should be in an amount equal to 55%;
• glycerol need to add 35%;
• flavors can be added to taste;
• nicotine is taken at the rate of 0.06 ml per 1 ml of water.

By the way, nicotine, no matter how purified it is, is still an alkaloid and toxic substance affecting the human nervous and vascular systems.

Increase in taste

To reduce the amount of steam, but to increase the concentration of taste, you should choose the following recipe:

• water - 5%;
• propylene glycol - 95%.

A lot of thick steam

If you like to create thick clouds of steam when vaping, then you can achieve this effect if you fill the solution with the following ingredients:

• water - 20%;
• glycerin - 80%.

For “samozamesa” it is important that after cooking it is infused for at least 12 hours in a dark place.

All the best and cleared ingredients for self-production of zizka can be selected and purchase online stores. How to do this is described in detail in this video.